TTP 10x0 UniTool Driver for Windows 95/98/ME
|
Version: |
1.16
|
| Revision Date: |
March 28, 2003
|
| Filename: |
TTPWin980116.zip
|
| File Size: |
125KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP 10x0 UniTool USB Driver for Windows
98/ME
|
Version: | 1.15
|
| Revision Date: | January 6, 2003
|
| Filename: |
TTPW98USB0115.exe
|
| File Size: | 901KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages.
Installation:
Unzip the files into a temporary directory and run the Installer. In Windows 98 you have to run a patch. After re-boot, Install the printer and when the Hardware Wizard detects the printer, install the USB Printing Support, NOT the driver. Then install the driver via the Add Printer Wizard and select the USB port. See also the instruction in the Readme file.
|
TTP10x0
Driver for Windows 2003/XP/2000/NT 4.0
|
Version: |
2007.1.0
|
| Revision Date: |
October 26, 2007
|
| Filename: |
Windows 2000/XP/2003: TTP 1_w2k_xp 2007.1.0.zip
Windows NT4: 178_NT4_082003.exe
|
| File Size: |
2K/XP: 404KB
NT4: 627KB |
| Description: |
Note: This driver package requires
firmware 3.20 or higher. Please refer to your product manual
for how to determine your currently loaded firmware version.
If you do not have 3.20 or higher currently installed, upload
version 3.50 (included in the Firmware folder of this package)
first, then install the new driver.
This driver package contains an NT4/2000/XP/2003 driver called
"TTP10x0" and is more advanced than UniTool drivers. For instance,
it prints better images by using gray scale dithering rather
than fixed-pitch raster graphics.
In addition to normal printing, this driver has a "Language
Monitor" that makes it bi-directional so you can retrieve
data back from the TTP10x0. This is necessary because Windows
NT4/2000/XP/2003 does not allow bypassing the printer driver
with API calls as Windows 9x does. So when using a printer
driver without the LM, the printer is mute. Because of the
complexity of programming the LM interface, it is necessary
that you have a good support connection with us. We will give
support if you are a registered user of our NT based driver.
Click
here to register.
Installation
1. If a Swecoin driver was previously installed, please use
the Uninstallation tool located at the top of this page. Alternatively,
you may carefully follow the "Uninstall
& Reinstall of Swecoin Drivers" document in our
knowledge base to prepare for the new installation.
2. Unzip your driver package file.
3. Plug in the printer. If it does not auto-detect, in the
Control Panel, Printers, select "Add New Printer",
select "Have disk", and browse to the directory
where you unzipped the driver files.
4. Install the printer driver.
Developers:
Please visit the Developers
page under the Support section for documentation and programming
samples. |
TTP10x0 Driver for Macintosh
|
Version: | 1.0.7 |
| Revision Date: | November 29, 2001
|
| Filename: |
macdrivers107.sit
|
| File Size: | 288KB
|
| Description: | This driver package contains an API based driver for the TTP1030 and TTP7000. The Swecoin driver is interfaced to the System using Apple's SerialShim, which installs two dummy drivers into the Driver Table in place of the standard .In and .Out serial drivers. As with all Macintosh drivers that are intended to operate printers, the Read and Write commands are not used. Instead, the data in the form of a bitmap is transferred to the driver using a Control command. The driver can then be used as the device-driver portion of a Choose-type Printer Driver
NOTE
The Swecoin Mac driver is not a Chooser-level driver! Please
see the Driver Manual for more information.
Installation
Extracting the .sit file will create a directory with the driver extensions for the TTP1030 and TTP7000, a Parameter Setup utility and a test program. You need to copy the driver extensions into the Extension folder and then you can plug in the printer. The Parameter Setup utility is used to set paper width, etc. You can test the driver functionality with a test program printing a test receipt.
|
TTP10x0 Driver for Linux
|
Version: |
1.8 |
| Revision Date: |
August 29, 2005
|
| Filename: |
ttp_linux_v1.8.tgz
|
| File Size: |
38KB
|
| Description: |
This driver works with TTP10x0, TTP20x0, TTP52x0, TTP7000 and TTP8200
printer families. It processes Ghostscript (or other) processed
PBM files and converts these into TTP escape sequences. A sample
printcap is enclosed. It uses the printer commands ESC s (print
graphics), ESC J (feed forward) and RS (cut and eject). It is
compiled for the x86 architecture. |
TTP 52x0 UniTool Driver for Windows 95/98/ME
|
Version: |
1.16
|
| Revision Date: |
March 28, 2003
|
| Filename: |
TTPWin980116.zip
|
| File Size: |
125KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP 52x0 NetVista Driver Installer for Windows 98
|
Version: | 1.010
|
| Revision Date: | July 25, 2002
|
| Filename: |
TTP52x0driverinstaller1010.exe
|
| File Size: | 872KB
|
| Description: | This driver package contains the TTP52x0 UniTool drivers for Windows 98, Windows NT4, and Windows 2000/XP for use with the IBM NetVista.
Installation
The self-extracting Zip file starts the TTP52Installer.EXE and
the installation of the driver for the current OS will start.
You will be asked to enter the paper width (80mm or 112mm) and
the communication port where the printer is connected. After
the installation is done, the driver is ready to be used. In
Windows 2000 and XP you need to set the paper width manually
in the Printer properties and the Printing Properties. |
TTP52x0 UniTool Driver for Windows NT4
|
Version: | 1.15
|
| Revision Date: | August 13, 2002
|
| Filename: |
TTPNT40115.exe
|
| File Size: | 150KB
|
| Description: | This package contains a driver for the TTP5000 and 52x0. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode, and cuts & presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP52x0 UniTool Driver for Windows 2000/XP
|
Version: | 1.15
|
| Revision Date: | August 13, 2002
|
| Filename: |
TTPW2k0115.exe
|
| File Size: | 645KB
|
| Description: | This package contains a driver for the TTP5000 and 52x0. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode, and cuts & presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP 52x0 NetVista Driver Installer for Windows NT4/2000/XP
|
Version: | 1.010
|
| Revision Date: | July 25, 2002
|
| Filename: |
TTP52x0driverinstaller1010.exe
|
| File Size: | 872KB
|
| Description: | This driver package contains the TTP52x0 UniTool drivers for Windows 98, Windows NT4, and Windows 2000/XP for use with the IBM NetVista.
Installation
The self-extracting Zip file starts at the end of the unzip process the TTP52Installer.EXE and the installation of the driver for the current OS will start. You will be asked to enter the paper width (80mm or 112mm) and the communication port where the printer is connected. Adter the installation is done, the dirver is ready to be used. In Windows 2000 and XP you need to set the paper width manually in the Printer properties and the Printing Properties. |
TTP52x0 Driver for Linux
| Version: |
1.8 |
| Revision Date: |
August 29, 2005
|
| Filename: |
ttp_linux_v1.8.tgz
|
| File Size: |
38KB
|
| Description: |
This driver works with TTP10x0, TTP52x0, TTP7000 and TTP8200
printer families. It processes Ghostscript (or other) processed
PBM files and converts these into TTP escape sequences. A sample
printcap is enclosed. It uses the printer commands ESC s (print
graphics), ESC J (feed forward) and RS (cut and eject). It is
compiled for the x86 architecture. |
TTP52x0 Driver for OPOS
|
Version: | 1.074 (New OPOS driver certified by IBM) |
| Revision Date: | July 25, 2002
|
| Filename: |
OPOSDriverV1074.exe
|
| File Size: | 1632KB
|
| Description: | This driver package contains the TTP52x0 OPOS drivers for Windows 98, Windows NT4, Windows 2000, and XP. This driver can also be used as an ActiveX control.
Installation
The self-extracting zip file will start the installation with the setup program. Setup will install the OCX files, register them, and make Registry changes.
Test the installation
You can test the driver functionality with the included test program printing a test receipt. You can also make changes to the current communication port settings with the test program.
Upgrade the Firmware
In order to operate the OPOS driver properly you have to make
sure that the TTP5250 has the Firmware version 2.65 or higher
and some special fonts loaded. You can update the Firmware and
the Fonts with the TTP5250FirmwareUpdatev2654
program. Run the self-extracting ZIP files and it will install
the Firmware Update program which will upload the new v2.65
and the 4 new fonts needed by the OPOS driver.
See the note on the Utilities
page! |
TTP 70x0 UniTool driver for Windows 95/98/ME
|
Version: |
1.16
|
| Revision Date: |
March 28, 2003
|
| Filename: |
TTPWin980116.exe
|
| File Size: |
125KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP 70x0 UniTool USB Driver for Windows
98/ME
|
Version: | 1.15
|
| Revision Date: | January 6, 2003
|
| Filename: |
TTPW98USB0115.exe
|
| File Size: | 901KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages.
Installation:
Unzip the files into a temporary directory and run the Installer. In Windows 98 you have to run a patch. After re-boot, Install the printer and when the Hardware Wizard detects the printer, install the USB Printing Support, NOT the driver. Then install the driver via the Add Printer Wizard and select the USB port. See also the instruction in the Readme file.
|
TTP70x0
Driver for Windows NT4/2000/XP/2003
| Version: |
Firmware >= 3.50: 2007.1.0
Firmware >= 3.00: 2005.1.0
Firmware 2.42a - 2.50: 092904
Firmware <2.42a: 022404
|
| Revision Date: |
Firmware >=3.50: October 26, 2007
Firmware >=3.00: May 24, 2005
Firmware 2.42a-2.50: September 29, 2004
Firmware < 2.42a: February 24, 2004
|
| Filename: |
Firmware 3.50: TTP 7_w2k_xp 2007.1.0.zip
Please note: This package includes firmware
3.50. This firmware is only for the TTP70x0 models (7020 &
7030). Do not attempt to load this firmware on a TTP7000 printer!
The driver itself must be used with firmware >=3.50 on a
TTP7020 or TTP7030!
Firmware 2.42a - 2.50: 7_w2k_xp_092904.exe
Please note: This package includes firmware
2.50. This firmware is only for the TTP70x0 models (7020 &
7030). Do not attempt to load this firmware on a TTP7000 printer!
The driver itself can be used with any 7000 series product.
Firmware < 2.42a: Windows 2000 & XP: 17_W2k_XP_022404.exe
Windows NT4: 178_NT4_082003.exe
|
| File Size: |
Firmware < 2.42a: 2K/XP: 494KB
NT4: 627KB
Firmware >=2.42a: 564KB |
| Description: |
This driver package contains an NT4/2000/XP driver called
"TTP70x0" and is more advanced than UniTool drivers. For instance,
it prints better images by using gray scale dithering rather
than fixed-pitch raster graphics.
In addition to normal printing, this driver has a "Language
Monitor" that makes it bi-directional so you can retrieve
data back from the TTP70x0. This is necessary because Windows
NT4/2000/XP does not allow bypassing the printer driver with
API calls as Windows 9x does. So when using a printer driver
without the LM, the printer is mute. Because of the complexity
of programming the LM interface, it is necessary that you
have a good support connection with us. We will give support
if you are a registered user of our NT based driver. Click
here to register.
Installation
NOTE: If you are installing the new style
driver package (09/29/04 or version 2005.1.0), the installation
instructions are included in the package. The file is a self-extracting
zip. The driver package includes firmware, driver, and documentation.
The included firmware is only for TTP7020 and TTP7030.
1. If a swecoin driver was previously installed, please
use the Uninstallation tool located at the top of this page.
Alternatively, you may carefully follow the "Uninstall
& Reinstall of Swecoin Drivers" document in our
knowledge base to prepare for the new installation.
2. Unzip your driver package file.
3. If you are using the 2007.1.0 (firmware >=3.50) release.
4. Plug in the printer. If it does not auto-detect, in the
Control Panel, Printers, select "Add New Printer",
select "Have disk", and browse to the directory
where you unzipped the driver files.
5. Install the printer driver.
Developers:
Please visit the Developers
page under the Support section for documentation and programming
samples.
|
TTP70x0 Driver for Macintosh
|
Version: | 1.0.7 |
| Revision Date: | November 29, 2001
|
| Filename: |
macdrivers107.sit
|
| File Size: | 288KB
|
| Description: | This driver package contains an API based driver for the TTP1030 and TTP7000. The Swecoin driver is interfaced to the System using Apple's SerialShim, which installs two dummy drivers into the Driver Table in place of the standard .In and .Out serial drivers. As with all Macintosh drivers that are intended to operate printers, the Read and Write commands are not used. Instead, the data in the form of a bitmap is transferred to the driver using a Control command. The driver can then be used as the device-driver portion of a Choose-type Printer Driver
NOTE
The Swecoin Mac driver is not a Chooser-level driver! Please
see the Driver Manual for more information.
Installation
Extracting the .sit file will create a directory with the driver extensions for the TTP1030 and TTP7000, a Parameter Setup utility and a test program. You need to copy the driver extensions into the Extension folder and then you can plug in the printer. The Parameter Setup utility is used to set paper width, etc. You can test the driver functionality with a test program printing a test receipt.
|
TTP7030
Driver for Linux (CUPS)
| Version: |
2006.0.8 |
| Revision Date: |
June 7, 2006
|
| Filename: |
(see below)
|
| File Size: |
32KB
|
| Description: |
This is a CUPS-based driver for the TTP20x0, TTP7030 and TTP8200
printers. If you would like to obtain this driver, please email
techsupport@swecoinus.com. |
TTP70x0 Driver for Linux
| Version: |
1.8 |
| Revision Date: |
August 29, 2005
|
| Filename: |
ttp_linux_v1.8.tgz
|
| File Size: |
38KB
|
| Description: |
This driver works with TTP10x0, TTP52x0, TTP7000 and TTP8200
printer families. It processes Ghostscript (or other) processed
PBM files and converts these into TTP escape sequences. A sample
printcap is enclosed. It uses the printer commands ESC s (print
graphics), ESC J (feed forward) and RS (cut and eject). It is
compiled for the x86 architecture. |
TTP8200
Driver for Windows 95/98/ME
|
Version: |
1.16
|
| Revision Date: |
March 28, 2003
|
| Filename: |
TTPWin980116.zip
|
| File Size: |
125KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages. |
TTP 8200 UniTool USB Driver for Windows 98/ME
|
Version: | 1.15
|
| Revision Date: | January 6, 2003
|
| Filename: |
TTPW98USB0115.exe
|
| File Size: | 901KB
|
| Description: | This driver contains one driver for the TTP10x0, TTP5000, TTP52x0, TTP7000 and TTP8200. The driver contains a macro to print in document mode and page mode. The difference between document and page mode is that the printer prints and cuts and presents a document after printing all pages in document mode and cuts and presents every page in page mode.
This driver also has the ability to shrink all printouts by 50% or 66% to fit larger web pages.
Installation:
Unzip the files into a temporary directory and run the Installer. In Windows 98 you have to run a patch. After re-boot, Install the printer and when the Hardware Wizard detects the printer, install the USB Printing Support, NOT the driver. Then install the driver via the Add Printer Wizard and select the USB port. See also the instruction in the Readme file.
|
TTP8x00
Driver for Windows NT4/2000/XP/2003
| Version: |
2006.2.0 (firmware 3.20 or higher)
100103 (firmware < 3.0) |
| Revision Date: |
April 27, 2006 (2006.2.0)
October 1, 2003 (100103)
|
| Filename: |
Firmware 3.0 or higher:
Windows 2000/XP/2003: TTP8-2006_2_0.zip
Firmware <3.0:
Windows 2000 & XP: 82_83_2K_XP_100103.exe
Windows NT4: 178_NT4_082003.exe
|
| File Size: |
2006.2.0 for 2K/XP: 1.59MB
100103 for 2K/XP: 128KB
NT4: 627KB |
| Description: |
Note: 2006.2.0 is the same as the
previous version, 2005.2.0, except that the new package is
distributed with firmware 3.21. This firmware should be used
for all new printers, and we encourage you to update from
earlier versions to 3.21. The driver has not changed. Version
2006.1.0 did not exist in a publicly-released form.
This driver package contains an NT4/2000/XP/2003 driver called
"TTP8x00" and is more advanced than UniTool drivers. For instance,
it prints better images by using gray scale dithering rather
than fixed-pitch raster graphics.
In addition to normal printing, this driver has a "Language
Monitor" that makes it bi-directional so you can retrieve
data back from the TTP8x00. This is necessary because Windows
NT4/2000/XP does not allow bypassing the printer driver with
API calls as Windows 9x does. So when using a printer driver
without the LM, the printer is mute. Because of the complexity
of programming the LM interface, it is necessary that you
have a good support connection with us. We will give support
if you are a registered user of our NT based driver. Click
here to register.
Installation
1. If a swecoin driver was previously installed, please use
the Uninstallation tool located at the top of this page. Alternatively,
you may carefully follow the "Uninstall
& Reinstall of Swecoin Drivers" document in our
knowledge base to prepare for the new installation.
2. Unzip your driver package file.
3. If you are using the 2006.2.0 (firmware >=3.0) (or higher)
release.
4. Plug in the printer. If it does not auto-detect, in the
Control Panel, Printers, select "Add New Printer",
select "Have disk", and browse to the directory
where you unzipped the driver files.
5. Install the printer driver.
Developers:
Please visit the Developers
page under the Support section for documentation and programming
samples. |
TTP8x00
Driver for Linux (CUPS)
| Version: |
2006.0.8 |
| Revision Date: |
June 7, 2006
|
| Filename: |
(see below)
|
| File Size: |
32KB
|
| Description: |
This is a CUPS-based driver for the TTP20x0, TTP7030 and TTP8200
printers. If you would like to obtain this driver, please email
techsupport@swecoinus.com. |
TTP8x00
Driver for Linux - Ghostscript
| Version: |
1.8 |
| Revision Date: |
August 29, 2005
|
| Filename: |
ttp_linux_v1.8.tgz
|
| File Size: |
38KB
|
| Description: |
This driver works with TTP10x0, TTP52x0, TTP7000 and TTP8200
printer families. It processes Ghostscript (or other) processed
PBM files and converts these into TTP escape sequences. A sample
printcap is enclosed. It uses the printer commands ESC s (print
graphics), ESC J (feed forward) and RS (cut and eject). It is
compiled for the x86 architecture. |
TTP20x0
Driver for Windows NT/2K/XP/2003
| Version: |
TTP2-2007.1.0 |
| Revision Date: |
October 26, 2007
|
| Filename: |
TTP 2_w2k_xp 2007.1.0.350.zip
(Requires firmware 3.50, included in package)
|
| File Size: |
1149KB
|
| Description: |
Note: This driver package requires
firmware 3.20 or higher. Please refer to your product manual
for how to determine your currently loaded firmware version.
If you do not have 3.20 or higher currently installed, upload
version 3.50 (included in the Firmware folder of this package)
first, then install the new driver.
FLASH MEMORY-MAPPING UPGRADE VERSION
CAUTION! — If upgrading from
firmware versions prior to 3.07, you must first load 3.07
(included here), then after that the version you really need.
This is because the versions 3.07 and up allows for firmware
files larger than the older firmware versions.
When loading a too-large firmware file the on a printer with
3.06 or earlier, the printer will lose it's ability to communicate
and must be sent in for service.
WARNING! – If this happens the printer will be in an
undefined state where components like motors etc. may be powered
and eventually fail so it is crucial to switch OFF the power
immediately.
This driver package contains an NT4/2000/XP/2003 driver called
"TTP20x0" and is more advanced than UniTool drivers. For instance,
it prints better images by using gray scale dithering rather
than fixed-pitch raster graphics.
In addition to normal printing, this driver has a "Language
Monitor" that makes it bi-directional so you can retrieve
data back from the TTP20x0. This is necessary because Windows
NT4/2000/XP/2003 does not allow bypassing the printer driver
with API calls as Windows 9x does. So when using a printer
driver without the LM, the printer is mute. Because of the
complexity of programming the LM interface, it is necessary
that you have a good support connection with us. We will give
support if you are a registered user of our NT based driver.
Click
here to register.
Installation
This is a Microsoft-signed
(Windows Logo Certified) driver. Previously, when installing
the driver, a Security Warning box would appear, telling you
that the driver is unsigned and you would have to manually
dismiss the dialog. With a signed driver, this is not necessary.
You may perform unattended, completely automated installations.
To do this, unpack the driver files and run Setup.exe to install
the driver files before attaching the printer to the system.
When the printer is attached, Windows will recognize the device
and install it automatically.
1. If a Swecoin driver was previously installed, please use
the Uninstallation tool located at the top of this page. Alternatively,
you may carefully follow the "Uninstall
& Reinstall of Swecoin Drivers" document in our
knowledge base to prepare for the new installation.
2. Unzip your driver package file.
4. Plug in the printer. Windows will detect and install the
printer automatically.
Developers:
Please visit the Developers
page under the Support section for documentation and programming
samples. |
TTP20x0 Driver for Linux (CUPS)
| Version: |
2006.0.8 |
| Revision Date: |
June 7, 2006
|
| Filename: |
(see below)
|
| File Size: |
32KB
|
| Description: |
This is a CUPS-based driver for the TTP20x0, TTP7030 and TTP8200
printers. If you would like to obtain this driver, please email
techsupport@swecoinus.com. |
TTP20x0
Driver for Linux- Ghostscript
| Version: |
1.8 |
| Revision Date: |
August 29, 2005
|
| Filename: |
ttp_linux_v1.8.tgz
|
| File Size: |
38KB
|
| Description: |
This driver works with TTP10x0, TTP52x0, TTP7000 and TTP8200
printer families. It processes Ghostscript (or other) processed
PBM files and converts these into TTP escape sequences. A sample
printcap is enclosed. It uses the printer commands ESC s (print
graphics), ESC J (feed forward) and RS (cut and eject). It is
compiled for the x86 architecture. |
Other
--
TTP 2100 Driver for Windows 2003/XP/2000
|
Version: |
2007.1.0
|
| Revision Date: |
October 26, 2007
|
| Filename non Airline: |
Windows 2000/XP/2003: TTP 21_w2k_xp 2007.1.0.350.zip
|
| Filename Airline: |
Windows 2000/XP/2003: TTP 21_w2k_xp_air 2007.1.0.350.zip
|
| File Size: |
2K/XP: 404KB
| | Description: |
Note: This driver package requires
firmware 3.50 or higher. Please refer to your product manual
for how to determine your currently loaded firmware version.
If you do not have 3.50 or higher currently installed, upload
version 3.50 (included in the Firmware folder of this package)
first, then install the new driver.
This driver package contains an 2000/XP/2003 driver called
"TTP21x0" and is more advanced than UniTool drivers. For instance,
it prints better images by using gray scale dithering rather
than fixed-pitch raster graphics.
In addition to normal printing, this driver has a "Language
Monitor" that makes it bi-directional so you can retrieve
data back from the TTP21x0. This is necessary because Windows
2000/XP/2003 does not allow bypassing the printer driver
with API calls. So when using a printer
driver without the LM, the printer is mute. Because of the
complexity of programming the LM interface, it is necessary
that you have a good support connection with us. We will give
support if you are a registered user of our NT based driver.
Click
here to register.
Installation
1. If a Swecoin driver was previously installed, please use
the Uninstallation tool located at the top of this page. Alternatively,
you may carefully follow the "Uninstall
& Reinstall of Swecoin Drivers" document in our
knowledge base to prepare for the new installation.
2. Unzip your driver package file.
3. Plug in the printer. If it does not auto-detect, in the
Control Panel, Printers, select "Add New Printer",
select "Have disk", and browse to the directory
where you unzipped the driver files.
4. Install the printer driver.
Developers:
Please visit the Developers
page under the Support section for documentation and programming
samples. |
|
